Itâ€™s not only an extra gearâ€¦
Itâ€™s about closer gear ratios for a smoother shifting performance and improved power transfer
Itâ€™s about riding optimized gear combinations that improve efficiency and durability
Itâ€™s all about performance: Dyna-Sys offers a more stable drivetrain for any type of rider!
Shimano introduces a wide range of 3 X 10 Mountain Bike components with Dyna-Sys drivetrain. Available already this spring will be the new DEORE XT and SLX groups, as well as a Dyna-Sys non-series crankset FC-M552 in black and silver. These products are an addition to the 9-speed components; they can easily be recognized by the Dyna-Sys logo. Visually, the components are identical to the 9-speed versions. Technically, they offer the new state-of-the-art in component technology: Dyna-Sys.
The CS-HG81 10-speed Cassette Sprockets have a Spider arm for 3 low sprockets. 11-34T = 11-13-15-17-19-21-23-26-30-34
Completely new drivetrain
Shimano has changed the standard set-up of the drivetrain to increase the efficiency and achieve a remarkable stability. The current standard set up is 44-32-22 teeth chain rings combined with 9-speed cassette sprockets. This will change to 42-32-24 teeth chain rings combined with 10-speed cassette sprockets.
The advantages of a closer ratio front drivetrain with wider range cassette sprockets:
1. Increased efficiency
A wider range 10-speed HG cassette means riders can spend more time in the 32T middle chain ring. And when they do have to drop to the granny, itâ€™s a smoother, faster shift thanks to the more useable 24T inner chain ring. Also the 42T big-ring is easier to ride and smoother to get into so riders will use it more.
Traditionally, riders have had to get used to making two or three recovery shifts in the rear every time they drop into the 22T granny. With Dyna-Sys, itâ€™s just one recovery shift and itâ€™s needed less often.
Dyna-Sys makes shifting to the granny a seamless transition, letting riders deliver consistent, efficient power while maintaining cadence.
2. Remarkable stability
An all-new directional mountain bike specific 10-speed chain means smoother shifts, lighter weight and greater overall performance.
Closer gear ratios mean smaller jumps in between gears, more efficient chain movement and less chance of dropping a chain in rough conditions.
Tighter cable routing and shorter rear derailleur housing make the system less prone to contamination, trail chatter or suspension movement.